Joint Design 7
The reaction force is the clamp load of the joint being compressed. ∆J represents the amount that the joint has compressed. As is illustrated, ∆J is smaller than ∆B. These values represent the stiffness of each
component. Often you will see the stiffness of a bolt of only 1/3 to 1/5 to that of the joint. We’ll elaborate more on this once we apply an external load. For now our bolt tension is equivalent to the preload, which is equivalent to the joint compression. As for now the tension force on the bolt (Fb) is equal to the compression force on the joint (Fj),
which is equivalent to the preload (Fp).






