Knowledge

Measure from the brake side edge of the rim to mounting surface of the wheel (as shown in the “Straight Edge” section of the diagram below. This will generally be a rea

Offset/ET: It is a measurement of how far the mounting face of the wheel (on the brake side) is away from the center line of the wheel. If the mounting face lines up exactly with t

Center Bore / Hub Bore: 66.6 mm Bolt Pattern (PCD): 5x112 Wheel Fasteners: Lug bolts Thread Size: M14 x 1.25 Wheel Tightening Torque: 140 Nm Specs: 9.5Jx22 ET32 10.5Jx22 ET43 Mater

Tuner Wheel Nuts / Tuner Wheel Bolts Tuner nuts and tuner bolts , often also referred to as slimline nuts and bolts, are used when there’s not enough space in the bolt hole of a wh

Flat seat wheel bolts and flat seat nuts are another popular seating type for OE wheels and aftermarket alloy wheels made to work with the original factory nuts. Popular vehicles t

This is a popular seating type for OE (Original Equipment) or factory fitted wheels, plus aftermarket wheels which are designed to work with your original bolts or nuts. Popular ve

There are three main seating types for both wheel nuts and wheel bolts. Knowing which is right for your car and wheels is important for ensuring a correct and safe fit. Please be a

This is a fairly simple one: thread length is simply the length of the thread on your bolt! If you’re replacing the wheel bolts on your car please be sure to accurately measure the

Thread Type Not all nut and bolt threads are cut exactly the same: depending on the machine used in its manufacture, the threads can differ greatly. This is extremely important to

Hex Size Hex size is the size of the hexagonal top on your wheel nuts or wheel bolts. This is important to know in order to know which size of socket or spanner you’ll need to put

Due to the massive variation in vehicle and wheel types, there is an equally massive number of different nut and bolt types out there. Some nuts and bolts will fit some cars, other

Direct Tension Control-Ultrasonics